● Independent guides to generators, power stations & home backup power Free generator size calculator →

Generac Generator Cost: Prices by Size and Installation Cost

Current Guardian Series list prices from 10 to 26 kW, plus what the installation really costs.

HomePowerIQ is reader-supported. When you buy through links on our site, we may earn a commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Our picks are based on specs, prices and published data, never on payment. How we make money.

On this page
Blueprint-style line drawing of a generic home standby generator with price tags, wired through a transfer switch into the house

Short answer: a Generac home standby generator typically costs $8,000 to $16,000 installed, according to Generac. The generator itself has an MSRP from about $4,269 (10 kW with a 16-circuit transfer switch) to $7,899 (26 kW with a whole-house switch). The rest of the bill is installation: the pad, gas or propane line, electrical work, permits and labor.

That spread is wide because the box on the pad is only part of the job. Below are Generac’s current list prices by size, what installation adds, which size fits which home, and how to keep the total down.

Generac generator prices by size

These are Generac’s published “starting at” MSRPs for popular Guardian Series air-cooled models. Dealer prices vary, and installation is extra.

ModelWhat it coversTransfer switchMSRP (starting at)
Guardian 10 kW (7172)Essential circuits16-circuit included$4,269
Guardian 14 kW (7223)Essentials plus a 3-ton AC or well pumpNot included$4,569
Guardian 14 kW (7224)Same, bundled16-circuit included$5,139
Guardian 14 kW (7225)Same, bundledWhole-house included$5,389
Generac 18 kW (7259)Most of a mid-size homeNot included$5,709
Guardian 24 kW (7209)Whole house for many homesNot included$6,559
Guardian 22 kW (7043)Whole house for many homesWhole-house included$6,979
Guardian 26 kW (7291)Whole house, larger homesWhole-house included$7,899

Prices checked on Generac.com in November 2026. Generac adjusts MSRPs and runs promotions, so confirm current pricing in your quote.

What installation adds

Generac says a simple installation can cost about $2,000, and more for complex sites. Its own estimate for the total project, including generator, equipment and installation, is $8,000 to $16,000. Here is what drives the installed price:

Cost itemWhat affects it
Automatic transfer switchIncluded with bundled models; otherwise bought separately. Whole-house (200 A) switches cost more than circuit-level ones
Pad and placementDistance from the house, slope, and local setback rules
Fuel lineNatural gas line length and whether your gas meter needs an upgrade; or a propane tank and line
Electrical workWire run to the panel, panel condition, load management modules for big appliances
Permits and inspectionSet by your city or county
LaborLocal electrician and plumber rates

The quickest way to lower your quote is to size the generator correctly. A 26 kW unit is not always needed. Load management modules can let a smaller generator start big loads like central AC one at a time.

Which Generac size do you need?

Generator sizeTypically powersGood fit for
10 kWFridge, freezer, furnace fan, lights, Wi-Fi, sump pumpEssentials-only backup
14 kWEssentials plus a 3-ton AC, well pump or water heater, per GeneracSmaller homes that want AC
18–22 kWMost of a typical home including central airAverage US homes
24–26 kWWhole house with large AC and several big appliancesLarger homes and all-electric homes

For a rough number before you call a dealer, use our generator size calculator. A standby generator should always be sized by the installer with a load calculation.

How to get an accurate quote

  1. Get two or three quotes. Generac dealers set their own installation prices.
  2. Ask each quote to list the generator model, the transfer switch type and amperage, pad, fuel work, electrical work, permits and warranty separately.
  3. Ask whether load management is included and whether it lets you choose a smaller generator.
  4. Check whether the warranty is the standard 5-year limited warranty or an extended plan, and what annual maintenance costs.

See Generac installation and quote options →

Cheaper alternatives to a standby generator

  • Portable generator plus interlock kit: a 7,500–9,500 W portable generator with a panel interlock can run most essentials. The interlock typically costs $400–$850 installed, but you start and refuel the generator yourself.
  • Portable generator plus transfer switch: similar idea with a fixed set of circuits; see our transfer switch guide.
  • Home battery backup: silent and automatic, usually paired with solar. It costs more for whole-home coverage but has no fuel and little maintenance.

Related: Whole house generator installation cost

How much does it cost to install a Generac generator?

Installation usually adds about $3,000 to $8,000 on top of the generator, bringing most Generac systems to $8,000 to $16,000 installed. The biggest swing factors are the distance from the generator to your panel and gas meter, whether the gas meter needs an upgrade, the transfer switch (included with bundled models like the 22 kW 7043) and local permit fees. The work itself takes one to two days, but permits and inspection usually stretch the process to several weeks. Our standby generator installation guide walks through every step, and the Generac home generators guide explains which size to choose.

Frequently asked questions

How much does a Generac 22 kW generator cost installed?

The Guardian 22 kW with a whole-house transfer switch lists at $6,979 MSRP. Once you add installation, most homeowners pay somewhere in Generac’s overall $8,000–$16,000 range, depending on fuel line, electrical work and local labor.

Does the price include installation?

No. Generac’s listed prices cover the equipment only. Installation is quoted separately by an authorized dealer.

Is a transfer switch included?

It depends on the model. Some Guardian models are sold bundled with a 16-circuit or whole-house automatic transfer switch; others are generator-only and need a switch added.

What does Generac’s warranty cover?

Generac standby generators come with a 5-year limited warranty. Extended warranties are often offered through dealers.

Can I finance a Generac generator?

Yes. Generac advertises financing through dealers, with payments starting around $109 a month for qualified buyers.

Sources: MSRPs from Generac product pages for the 10 kW 7172, 14 kW 7223, 14 kW 7224, 14 kW 7225, 18 kW 7259, 24 kW 7209, 22 kW 7043 and 26 kW 7291; installed-cost range and financing from Generac’s installation guide. Checked November 2026.

Charles Grover

Charles Grover writes HomePowerIQ’s guides to generators, portable power stations and home backup power. He compares models using manufacturers’ published specs, independent data and current prices, with a focus on sizing backup power correctly and connecting it safely.